FREAパンフレット（英語）

19/26

FacilitiesDemonstration Field1 Energy Control Building2 Hydrogen Energy Carrier Demonstration Building3 Pure Hydrogen Experiment Building4 Photovoltaic Power System Demonstration Field5 Wind Power Generation System6 Ammonia Direct Combustion Gas Turbine Demonstration FacilityConducting studies on a renewable energy network through the integration of large-scale PV and wind power systems with power storage using hydrogen and batteries.Conducting the performance evaluation of a PV generation system as well as the development and demonstration of a control technology for a power conditioner.Characteristics:● Power grid simulator (AC simulator: 500 kVA)● PV array simulator (600 kW)● RLC load (250 kVA)● PV power conditioning system (three types, one unit for each type)● Solar simulator for PV module (simulated sunlight source)● I-V tracer for PV modules● EL test device for PV modules● EMS (Energy Management System)● SCADA for the PV and wind power systemsCharacteristics:● Rated output: 500 kW　● Solar cell module: total 11 types● Solar cell module: total 2,500 sheets● Power conditioner for PV generation (three types, 22 units)● Area for demonstrating the PV generation system is about 8,000 ㎡Conducting verication of the Japan-class wind turbine design criteria and a demonstration study on advanced wind turbine control technol-ogy. A nacelle-mounted LIDAR is used to develop and evaluate technologies and devices to remotely measure the wind velocity and direction on the upstream side of the wind turbine from above the nacelle. In addition, the team measures and assesses the wind turbine noise using a sound-source surveying device to elucidate the noise properties and also conducts studies on noise reduction.One of the world’s largest MCH production and utilization demonstration systems with an alkaline water electrolyzer, hydrogenation catalytic reactor, large storage tank, and dehydrogenation catalytic reactor with integrated cogeneration engine is operated to demonstrate a hydrogen energy carrier production and utilization integration system.Characteristics:● Komaihaltec Inc. KWT300　● Rated power output: 300 kW● Excellent specications in wind resistance, lightning resistance, transportation, and 　 workability● Diameter: 33 m; blade length: 16 m; and hub height: 41.5 m (highest point reached: 58 m)● Rated wind speed: 11.5 m/s● Cut-in wind speed: 3.0 m/s, cut-out wind speed: 25 m/s● Survival wind speed: 70 m/sCharacteristics:● Hydrogen generation capability by alkaline water electrolysis: 34 Nm3/h● Hydrogenation catalyst: 70 L/h (MCH production capacity)● MCH storage capacity: 20 kL (power generation conversion: about 10 MWh)● Hydrogen cogeneration output (power and heat): power 60 kW and heat 35 kWCharacteristics:● Proton exchange membrane type water electrolyzer　 (with fuel-cell function)● Solar thermal system● Metal hydride hydrogen storage system● Quick charger for electric vehicles● Charge and discharge equipment for electric vehicles (V to Home)Conducting research on hydrogen energy storage systems and thermal energy storage systems.Characteristics:● Micro gas turbine power generator (rated output: 50 kW (at kerosene operation))● Ammonia gas, methane gas, or kerosene can be used as fuel.● The team achieved gas turbine power generation of 41.8 kW by burning methane-ammonia mixed gas. Moreover, 41.8 kW of power was successfully generated by burning only ammonia (100% ammonia) as a fuel (the world’s rst success).● The concentration of nitrogen oxide discharged from the NOx removal equipment satised the environmental criteria.Conducting research and development on the technology for gas turbine power generation that directly burns and uses hydrogen carrier ammonia as fuel.12345619